I added the mounting points for the front disk brakes.
Left and right aren't the same, because I didn't go for a center placed wheel. It is a tiny bit to the front.
Made it, so there is an opening, where the mount, slides in. Than it is ad the right position and I only need to weld it.
I did this, so it is aot easier to make. Making the mounts the last time, wasn't that easy. I hot it, but I was looking where and how to mount it. This solved it.
Here are the dimensions for the mounting.
I used the first mounting. I have 2 of those mounts for my BB7 brakes.
Changed also the front mounting a bit and I can now mount my front wheels with a M12x1,75x75 bold.
As it bends, easy to replace and also easy to remove the wheels. More common and also easier to get and work on.
Added in the rear, the battery mounts. They will be narrower, but have it now, to see how it fits with the chain.
Ordered a 3 switch. This because I will mount 2 batteries and with the switch, I can turn one on or both off. This way I can switch from battery, without using connectors.
Hope to finish the steering today.
Than I can make the drawings and see if the person I need, is there.
Going to contact tomorrow the BMX shop, to make my wheels.