Made a cover for the cargo area. It hinges at the front and holds down via it's own weight. It also stiffens the rear body somewhat. Getting the roof mounted proved more work than expected. After discarding an initial attempt I decided on a false rear body panel which the rear slots into with a rubber fastener in the middle to prevent the wind hauling it off. The front is on two press-studs per side. I have still to make the stow away slot under the bonnet. I'll try to finish the wiring to the front lights tomorrow. One good bit of news is I'd forgotten I'd used steel screws for the body during it's build and still have the nylon ones to go in after paint so that'll loose close on 1KG.