Recent content by Emiel

The first one is probably for the school races that they have there. There they have surten rules because they race with many recumbents on a small track. It is more protection against other riders then going over with the trike. A roll cage for a trike is useful for mounting a body to. If you...

BMX tires? I used bmx tires on my trike. As I used them on a lower pressure, then the ride was smooth. The disadvantage was only that you get more toll in the corners. But as you ride on bumpy roads, they work great.

Only anoing with making pictures as it gets dark.

I fixed the spreng to the frame. Here some images. The seat isn't mounted yet. The Hamer holds it in position.

Looks good.

Yes I have both. I wanted only disk in the rear, but I also wanted in the front 2 brake handles in the same style. The problem was, was that the single one, doesn't has a lock option. That is shy I added a v-brake. I have a small lock system what tgrt normally use to lock seat suspension and air...

Posting images can be in different ways. You can upload them to a site and post them by using the option above in the bar where you can also change text size and other things. You can also upload them on the forum. Make them smaller, so they don't take to much space. Posting them us the same...

When I made a 3d model, I noticed that the part where you mount the back of the seat against, isn't right. It isn't a big problem and the dimensions don't really come that exact. As you do it like in the discription, it will be fine. You can set the angle right and mount the seat to it, even...

Oops posted double

I wanted to weld the mount for the rear suspension to the frame, but it was wet all day, so I couldn't. In the end it was good, because the spacer I designed, was to small. I needed to change the dimensions and print it again. Now the spring setting is right. The rear wheel removed from my...